You will need…
Enter the search term and press "ENTER" .
Your eye-catcher: bedside table in gold
Project from Angelina - 0 CommentsSweet dreams come with our new DIY bedside table. In the bedroom, you will set the latest trends with natural wood structures in white and shiny metallic colours in gold.
Just a few steps to have a bedside table shining in gold
- One roll of whitewood
- One roll of gold
- d-c-fix® Handcrafting kit with smoothing blade and cutter knife
- Scissors
- Pencil
Let’s go
Step 1
Take measurements of the bedside table and draw the dimensions with a 3 cm wide crop margin on the adhesive film. Cut out the marked surface and then peel off the backing paper from the adhesive film.
Step 2
Place the front panel for the draw carefully on the stick side of the film.
Step 3
Press down the film, stroking from the centre outwards using the smoothing blade.
Step 4
Cut away the surplus film from the edges.
Step 5
Repeat the above steps for the sides and top of your bedside table. Make sure that the wood grain always runs in the same direction.
Step 6
Lastly, cut out a large circle from your golden decoration film and stick it on the surface of the front panels of the drawers.
You’re done!
Post A Comment
EXPERT ADVICE
So that the gold speckles are distributed evenly, you can press them out of the gold film using a circle punch.
Preparation time
15 min
Execution
30 min
Difficulty level
Beginner
Costs
low
Projects you might like
No Comments